NEW *** mikroCNC now supports a Python 3.x interpreter for writing user scripts
Customers gallery and experience with AC and DC servo motor drives
CNC machine for complete machining of interior doors, working area dimensions 2500x1250x250mm.
A DC motor control system developed according to a special request is presented.
CNC machine for cutting with a plasma cutter with working area 3000x1500mm.
Hot wire CNC cutting machine for foam blocks. Working area is 1300x2200x2500 mm.
Modernization of CNC plasma cutting machines with a working area of 2000 x 3000 mm.
4 Axis CNC router with Automatic Tool Changer (ATC) is presented. An interesting solution for rotating of the Spindle motor was implemented.
Upgrade of CNC lathe Somab Unimab 300 on which the existing original analog Indramat MOD14/1X012-055 servo amplifiers for DC motors were left.
An upgrade of the Deckel FP42NC CNC milling machine. Original analog amplifiers for DC motors were used.
Retrofit of Brother TC225 CNC Tapping Center Machine with Sanyo Denki servo drives and motors.
This is an interesting project I made with your ETH-BOX motion controller.
Retrofit of DYE vertical turret CNC lathe. Machine still use existing Siemens Simodrive servo drive and power supply.
Retrofit of 4-axis Alcera Gambin CNC milling machine. Machine still use existing Gould Gettys N360 servo drives and power supply.
Retrofit of CNC machine for woodworking. Machine still use existing servo motor amplifiers and power supply.
CNC router with working area 1550x3050x200 mm. Router could be used for woodworing, aluminum composite panels, plexiglass/acrylic and similar materials.
Retrofit of machining center Heckler & Koch HK BA 20 CNC is achieved using Audioms Automatika DC servo drives.
Modernization of Koike CNC gas/plasma cutting machine with work table area of 4x2m and 3 burners.
The goal of the project is modernization of EMCO Compact 5 CNC lathe that has two MPGs (Manual Pulse Genetators - manual incremental encoders) for manual operation to perform simpler jobs without need for writing G codes.
The original control hardware on CNC lathe OKUMA LB15 II is replaced by:
The CNC milling machine is completely handmade, with incorporation of some ready-made assemblies.
Retrofit of 3-axis CNC milling machine Rigiva Riva RS80 with substitution of the original numeric controller and motor drives.
Retrofit of 3-axis CNC milling machine with substitution of the original numeric controller and motor drives.
Retrofit of 3-axis CNC milling machine with substitution of the original controller.
Retrofit of Hurco CNC milling machine by replacing original control system with Audiohms control electronics.
Retrofit of 4-axis CNC profile grinder Grifo RPA-CN-4A.
Retrofit of 3-axis CNC mill with substitution of the original Sharnoa Tiger IV controller.
The photographs show the 4-axis CNC milling machine MAHO MH700 C after the retrofit.
Retrofit of CNC lathe Hitachi Seiki 3NE-300, made in Japan, year of manufacturing 1987. After retrofiting work over 3 years without any error.
Retrofit of CNC lathe Krasni Proleter manufactered in Russia. Lathe can handle workpieces up to Ø400 x 1000 mm.
CNC Plasma cutting machine 2500 x 1500 mm realised with Audiohms control electronics:
Author: Aco Živković, Čačak, Serbia
CNC plasma cutting machine 2200 x 1200 x 150 mm, speed 10 m/min, THC. Overall machine dimension 2700 x 2000 mm.
Author: Aco Živković, Čačak, Serbia
Author: Aco Živković
AUDIOMS AUTOMATIKA DOO
Ibarskih rudara str. 3/8, 34000 Kragujevac
Serbia, EUROPE
Web: www.audiohms.com
E-mail: prodaja@audiohms.com
Technical support
E-mail: office@audiohms.com
